Crackfill Melter/Applicator

Crackfill Melter/Applicator
Product Code: I1-5-9
   - OR -   

Hot applied Crackfill using a 10 gallon Portable Melter Applicator (MA10) is the fastest, most efficient method for repairing cracks in the asphalt. Mounted on steel wheels and equipped with spring-loaded hand control release and steel screed for uniform width, the MA10 is easy to maneuver for following cracks.

Pair with the 30 Gallon Crackfill Pre-Melt Kettle to minimize downtime with continuouse application!

EquipFlex Equipment Financing
Qualifies for EquipFlex™ Financing


Product Features

  • Comes complete with hand agitator, temperature gauge, torch head, hose, regulator, propane bottle holder, hinge fill lid
  • 14 gauge double wall steel construction with vent holes
  • Will provide hot material in just minutes
  • 1/8” thick by 11” rear steel wheels for easy maneuvering
  • Dual levers allow the operator to control the screed and flow valve with one hand
  • 10 gallon capacity
  • Propane Bottle not included
  • Can be used without heat for cold pour materials

 

Technical Info
Specs Construction: 14 gauge steel | Capacity: 10 gallons | Dimensions: 27”W x 47”L x 36”H Burner: 50,000 BTU thermostat controlled | Weight: 110 lbs. | Application: up to 4,800 linear ft. of 1/2” x 1/2” cracks/day

Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating:
Unsatisfactory            Excellent


Enter the code in the box below: