Black Medallion ZoomFlex II™ Sealer Additive

Black Medallion ZoomFlex II™ Sealer Additive
Black Medallion ZoomFlex II™ Sealer AdditiveBlack Medallion ZoomFlex II™ Sealer Additive
Brand: Medallion Series
Product Code: I1-2-1PL
   - OR -   

ZoomFlex II is the industry's fastest drying and most flexible sealcoat additive. This high performance sealcoat additive provides unmatched accelerated dry time, wear ability, flexibility and adhesion to all pavement sealers. ZoomFlex II enhances both Coal Tar Emulsions and Asphalt Emulsion sealcoats.

Sold as 5 gal. buckets.

Smart Sealcoating Starts with the Mix Design

Why Should I Sealcoat

Product Features

  • Dry Accelerator: Resistance to damage by wash out and inadvertent traffic. Safely open to traffic sooner which means less business interruption after application.
  • Wear Properties: Sealcoat will look and shield the pavement surface better and for a longer period of time.
  • Petroleum Resistance: Reduces damage caused by oil and other petroleum penetration.
  • Aggregate Retention: Helps the sealcoat to hold long lasting skid, slip and wear resistance which assists in maintaining a safe walking pavement surface.
  • Flexibility & Cohesion: Reduces surface cracking of sealcoat and helps it to bond better to smooth asphalt and pavement surfaces.
  • Color Control & Retention: Sealcoat dry’s to a deep black color and provides for better UV protection.
  • Environmentally Friendly: This sealcoat additive contains waterborne polymers and contains low VOC’s which account for greener manufacturing, application and disposal.

Want to know when the weather will be best for sealcoating? Check the DAF Scale for your area today! 


Surface must be clean and free from dirt, dust and oil. Treat oil, grease and gasoline spots with concentrated Oil Spot Seal/Prime before sealcoating.

Mix well before using. Use 2 to 5 gallons of additive undiluted to modify 100 gallons of sealcoat. The amount will vary based on the end use in the traffic pattern areas or specifications. Always pour sealcoat first into mechanical spray or squeegee type machines, then add the proper amount of water. When agitating, slowly add the sealcoat additive and mix to uniform consistency. Then add proper amount of aggregates (silica sand, etc.) and mix thoroughly before application.

Depends on specification. PPP’s recommended sealcoat mix design is 3 gallons ZoomFlex II additive per 100 gallons of sealcoat, 35 gallons water, and 300 pounds of silica sand.

Equipment clean up:
Wash tools with water, use suitable solvent if material has dried.

Additional Info
Coverage Rate 2-5 gal. per 100 gal. of concentrate sealer

Write a review

Your Name:

Your Review: Note: HTML is not translated!

Unsatisfactory            Excellent

Enter the code in the box below: